| 1. | Design of small tft - lcd driver circuit
驱动电路的设计 |
| 2. | Optimization design and simulation analysis on high power gto driver circuit
门极驱动电路的优化设计与仿真分析 |
| 3. | The step motor driver circuit are build by using chip l297 and l298 and it is controlled by single chip microcomputer
采用集成芯片l297和l298来驱动步进电机,并设计了驱动电路。 |
| 4. | At the same time , we design microelectrode array cell electrofusion chip ’ s driver circuit according to the parameters . utilizing max038 chip to produce the
同时,我们根据参数要求,设计出了微电极阵列细胞电融合芯片的外围驱动电路。 |
| 5. | Therefore , under the circumstances , several requirements and measures are proposed for high - speed mosfet driver circuit and reducing mosfet hf loss
因此，针对这种情况，提出高速mosfet驱动器应具备的几点要求以及降低mosfet高频开关损耗的几项措施。 |
| 6. | The tristate driver circuit that interfaces with the main distributing frame and the transmit / receive filters . the drivers and filters are part of the port grouping
与主配线板和发送接收滤波器接口的三态驱动电路。驱动器和滤波器都是端口分组的一部分。 |
| 7. | Then , the main circuit used igbt module and its driver circuit , protect circuit and its control circuit are designed in accordance with the characteristic of control system of doubly - fed vscf wind power generator
接着针对变速恒频双馈风能发电控制系统的特点，设计了基于igbt模块的主电路及其驱动、保护和控制电路。 |
| 8. | Therefore , the result can be applied to other power electronic devices such as transducer , svg , etc . lastly , apf ' s main circuit , snubber circuit and driver circuit were fixed , debugged , and improved in some aspects
最后，本文对有源电力滤波器的主电路、吸收缓冲电路、驱动电路进行了安装、调试，并做了一些改进。 |
| 9. | According to the characteristic that the measured blood serum sample ' s volume is very small , the reasonable transportation device is selected , the minim titration device and the driver circuits of transportation facility are designed
根据被测血清样本体积很小这一特点，合理选择输送设备，设计微量滴定装置和输送设备的驱动电路。 |
| 10. | Secondly according the selected motors , we design the brushless dc motor driver circuit based on chip si9979 , the main control circuit based on microcontroller dsp 2810 and power and communication circuit
其次,根据选用的电机,设计了以si9979芯片为核心的无刷直流电机驱动电路;设计了以dsp2810为核心的主控电路;同时还设计了系统电源电路和通讯电路。 |
